2326 Canada Lincoln 13:1 Ratio Pump Grease Scott Pump Service Ltd. Product

2326

Lincoln 13:1 Ratio Pump

DESCRIPTION

13:1 piledriver III pump comes with 84808 air motor 94908 air brake 84921 shovel style pump tube 44 cu in output cycle 5:1 cycles per gallon

Series III Air Motor Features• These fully pneumatic air motors reverse stroke direction without mechanical linkages and are simpler and more reliable than older designs.• Air motors are 3, 4, 6, 8 and 10 inches (76, 101, 152, 203 and 254 mm) diameter.• An air signal valve activates a relay valve at the end of each stroke.• The shifting relay valve changes the power valve position.• The power valve shifts air flow to the opposite side of the power piston to reverse stroke direction.• Modular Construction: Air motors are easy to install, maintain and upgrade with options like AirBrake™.• Built-in Muffler: Meets or exceeds OSHA requirements at recommended air pressures.• AirBrake Options: Stops runaway pump, prevents product spills, damage and excess wear and activates an optional remote alarm device. AirBrake available already installed (refer to pump specification charts) or can be ordered separately as Model 85317. For remote monitoring of AirBrake, order Model 244398 signal kit.

Stroke length: 6 in. (152 cm)
Air inlet: 3/4 in. NPT(F)
Material outlet: 1.5 in. NPT(F)
Min. ID air supply hose: 3/4 in. (19mm)
- Except for these models:
  - 2367: 1/2 in. (12mm)
  - 2368: 3/8 in. (10mm)
  - 2332: 1/2 in. (12mm)

Model std. Air	Ratio	Pump tube style	Pump tube model	Air motor model	Air motor diameter		Max. outlet air pressure		Air consumption per cycle
Model std. Air	Ratio			Air motor model	Air motor diameter		Max. outlet air pressure		SCFM	M3/Min.	SCFM	M3/Min.
Motor only					in.	mm	psi	bar	@ 70 psig	@ 4.8 bar	@ 100 psig	@ 6.8 bar
2375	75:1	Shovel	84902	Std. 86810 w/ AirBrake 94910	10	254	7500	517	2.5	0.071	3.6	0.10
2342	42:1	Shovel	84900	Std. 86810 w/ AirBrake 94910	10	254	4200	290	2.5	0.071	3.6	0.10
2320	20:1	Shovel	84921	Std. 86810 w/ AirBrake 94910	10	254	2000	138	2.5	0.071	3.6	0.10
2321	20:1	Flat check	84922	Std. 86810 w/ AirBrake 94910	10	254	2000	138	2.5	0.071	3.6	0.10
2335**	20:1	Flat check	85922	Std. 86810 w/ AirBrake 94910	10	254	2000	138	2.5	0.071	3.6	0.10
2322	45:1	Shovel	84902	Std. 84808 w/ AirBrake 94908*	8	203	4500	310	1.9	0.054	2.6	0.074
2323	35:1	Shovel	84901	Std. 84808 w/ AirBrake 94908*	8	203	3500	241	1.9	0.054	2.6	0.074
2325	25:1	Shovel	84900	Std. 84808 w/ AirBrake 94908*	8	203	2500	172	1.9	0.054	2.6	0.074
2326	13:1	Shovel	84921	Std. 84808 w/ AirBrake 94908*	8	203	1300	90	1.9	0.054	2.6	0.074
2334**	13:1	Flat check	84922	Std. 84808 w/ AirBrake 94908*	8	203	2000	138	1.9	0.054	2.6	0.074
2328	6:1	Flat check	84923	Std. 84808 w/ AirBrake 94908*	8	203	600	41	1.9	0.054	2.6	0.074
2349	25:1	Shovel	84902	Std. 84806 w/ AirBrake 94906*	6	152	2500	172	1.1	0.031	1.6	0.045
2350	20:1	Shovel	84901	Std. 84806 w/ AirBrake 94906*	6	152	2000	138	1.1	0.031	1.6	0.045
2352	15:1	Shovel	84900	Std. 84806 w/ AirBrake 94906*	6	152	1500	104	1.1	0.031	1.6	0.045
2353	7:1	Shovel	84921	Std. 84806 w/ AirBrake 94906*	6	152	700	48	1.1	0.031	1.6	0.045
2333**	7:1	Flat check	84922	Std. 84806 w/ AirBrake 94906*	6	152	2000	138	1.1	0.031	1.6	0.045
2356	3:1	Flat check	84923	Std. 84806 w/ AirBrake 94906*	6	152	300	21	1.1	0.031	1.6	0.045
2367*	7:1	Shovel	84900	Std. 84804 w/ AirBrake 94904*	4-1/4	108	1400	97	0.8	0.023	1.1	0.031
2368*	3:1	Shovel	84921	Std. 84804 w/ AirBrake 94904*	4-1/4	108	600	41	0.5	0.014	1.1	0.031
2332**	3:1	Flat check	85922	Std. 84804 w/ AirBrake 94904*	4-1/4	108	300	21	0.5	0.014	1.1	0.031

Model	Output per cycle		Approx. cycles per		Gallons / Liters per minute
					30 CPM		50 CPM		75 CPM
	cu. in.	cc	gal.	liters	gal.	liters	gal.	liters	gal.	liters
2375	12	196	20	5	1.5	5.9	2.6	9.8	3.9	14.9
2342	22	360	11	3	2.8	10.8	4.8	18.0	7.1	27.0
2320	44	721	5	1	5.7	21.6	9.5	36.0	14.3	54.0
2321	46	754	5	1	5.8	22.6	9.9	37.7	14.9	56.5
2335	46	754	5	1	5.8	22.6	9.9	37.7	14.9	56.5
2322	12	196	20	5	1.5	5.9	2.6	9.8	3.9	14.9
2323	17	278	14	4	2.2	8.3	3.7	13.9	5.5	20.8
2325	22	360	11	3	2.8	8.3	3.7	13.9	5.5	20.8
2326	44	721	5	1	5.7	21.6	9.5	36.0	14.3	54.0
2334	46	754	5	1	5.8	22.6	9.9	37.7	14.9	56.5
2328	85	1393	3	1/2	11.0	41.7	18.4	69.6	27.6	104.5
2349	12	196	20	5	1.5	5.9	2.6	9.8	3.9	14.9
2350	17	278	14	4	2.2	8.3	3.7	13.9	5.5	20.8
2352	22	360	11	3	2.8	10.8	4.8	18.0	7.1	27.0
2353	44	721	5	1	5.7	21.6	9.5	36.0	14.3	54.0
2333	46	754	5	1	5.8	22.6	9.9	37.7	14.9	56.5
2356	85	1393	3	1/2	11.0	41.7	18.4	69.6	27.6	104.5
2367	22	360	11	3	2.8	10.8	4.8	18.0	7.1	27.0
2368	44	721	5	1	5.7	21.6	9.5	36.0	14.3	54.0
2332	46	754	5	1	5.8	22.6	9.9	37.7	14.9	56.5
Order pump tube and air motor separately when selecting 3" and 4" air motors and AirBrake™ equipped models. *Same as standard PileDriver III except mounts with standard 2.5 in. NPTF(F) or 3 in. NPTF(M) pipe inlet.

DOCUMENTS