Lincoln SL-V Injector Manifold Assembly zoom_in
Lincoln SL-V Injector Manifold Assembly

Series SL-V

  • For single-line, high-pressure central lubrication system
  • For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2
  • Output is externally adjustable
  • Indicator stem permits visual check of injector operation
  • May be combined in a circuit of Injectors SL-32, SL-33, SL-V XL, SL-1 and/or SL-11
  • Individual injectors can be easily removed for inspection or replacement
  • Each SL-V injector includes a clear polycarbonate protective cap.


  • Series SL-V
  • Carbon steel
  • Output:
    • Minimum: .015 cu. in. (.25 cc)
    • Maximum: .08 cu. in. (1.31 cc)
  • Operating pressure:
    • Minimum: 1850 psig (128 bar)
    • Maximum: 6000 psig (413 bar)
    • Typical: 2500 psig (172 bar)
    • Vent: 1000 psig (69 bar)
  • Manifold inlet: 3/8 in. NPTF(F)
  • Injector outlet: 1/8 in. NPTF(F)
85770-1One injector manifold1Single mounting hole2-1/263
85770-2Two injector manifold2Single mounting hole376
85770-3Three injector manifold31-1/4324-1/4108
85770-4Four injector manifold42-1/2635-1/2140
85770-5Five injector manifold53-3/4956-3/4171
85770-6Six injector manifold651278203
85771Replacement for manifold injectors
85772Single injector/no manifold - 3/8 in. NPTF(M) inlet


  1. Injector manifolds have 13/32 in. (10.3mm) diameter mounting holes for 3/8 in. bolt.
  2. Injectors have polyurethane seals. Check compatibility with synthetic lubricants.
  3. Injectors rated for 180F (80C)max. ambient temperature, depending on lubricant used.
  4. Injectors include fitting for filling feedlines via alternate outlet port.
  5. Output with adjustment screw hand-tightened is .015 cu. in. Maximum output is achieved with five turns at .014 cu. in./ turn.